SCT-10 Signal Conditioning Transmitter

$13.40$877.70

  • Converts digital weight to analog output
  • Sums four input channels in parallel
  • Theoretical calibration, real-weigh calibration, linearity calibration

Maximum Control, Miniature Size

For PLC systems that require weight data from a scale, Rice Lake’s compact SCT-10 transmitter delivers equivalent signal-conditioning function without the cost or bulk of a full-size weight indicator/controller.

Rice Lake’s SCT-10 is DIN-rail mountable within a cabinet or control panel, where they convert a scale’s load cell signal to serial or analog output. Technicians and operators find the analog output signal particularly useful for monitoring hopper filling and discharge. Unlike many other signal transmitters, Rice Lake SCTs have their own integrated display, with annunciators for unit and weighing status, and push buttons or toggle switch and digital rotary for zero, tare and setpoint entry—ultimately simplifying scale setup, calibration and operation.

  • Push-button or preset tare
  • Full-scale analog output with zero setting and PLC correction of analog signal
  • Displays weight, configuration, calibration and error conditions
  • DIN-rail mounting, suitable for back panel
  • Two digital inputs, two digital outputs
  • Supports ASCII or MODBUS-RTU protocols
Guaranteed Safe Checkout

SCT-10 Signal Conditioning Transmitter Specifications

Power:
Input: 12 to 24 VDC

Power Consumption:
5 W

Excitation Voltage:
5VDC, 120mA, 8 × 350 ohm load cells

Analog Signal Input Range:
+/-19.5 mV

Analog Signal Sensitivity:
0.3 μV/graduation minimum
1.0 μV/graduation recommended

A/D Sample Rate:
80 Hz

Resolution:
Internal: 16,000,000 counts
Display: 999,999

System Linearity:
± 0.01% full scale

Digital I/O:
2 inputs 5-24VDC, 2 outputs
24 VDC/60 mA
N.O. or N.C. (solid state)

Communication Ports
RS-485 or RS-232 simplex supports up to 115,200 bps

Analog Output:
Optoisolated, 16 bit
0-20 mA, 4-20 mA (max 300 ohm)
0-10 VDC, 0-5 VDC, -10 to 10 VDC, 5 to 5 VDC, (min 10 k ohm)

Annunciators:
Net, center of zero, stability, KG, G, LB

Display:
0.3 in (8 mm), six-digit, 7 segment LED

Keys/Buttons:
4-key membrane panel, tactile feel
Zero, Tare, Print, Menu, Escape,
Left and Up Navigation, Enter

Dimensions:
(L × W × H)
DIN Rail Mount: 4.84 × 3.62 × 1.96 in (123 × 92 × 50 mm)
Enclosure: 6.69 × 5.51 × 3.74 in (170 × 140 × 95 mm)

Temperature & Humidity:
Operating Temperature: -4 °F to 140 °F (-20 °C to 60 °C)
Humidity: 85% non-condensing

Rating/Material:
DIN rail mount: NEMA Type 1
Enclosure: NEMA Type 4/IP67, plastic
Clear cover: six PG9 cord grips

Weight:
1 lb (0.5 kg)

Warranty:
One-year limited

Approvals:
cULus Recognized

Model

Indicator,Convertor SCT10 SCT10-AN, 12-24VDC, Analog Output, and RS485/232 Serial Port DIN Mount, SCT-10, Indicator,Convertor SCT10 SCT10-AN, Enclosed in Plastic Junction Box, 12 -24VDC, Analog Output and RS485/232 Serial Port. SCT-10, Lit,Manual SCT 10 Series Sct Weight Transmitter, End Clamp, Left and Right set with Clip for DIN 35 Rail for SCT-10 SCT-30, Power Supply,IDEC 12VDC DIN Rail Mount, 1.3 Amp, Input: 85 to 264 VAC, 100 to 370 VDC 15W, Power Supply,24VDC 1.3A Din Mount Input 90 to 264VAC,120 to 370VDC, UL E135494

Reviews

There are no reviews yet.

Be the first to review “SCT-10 Signal Conditioning Transmitter”

Your email address will not be published. Required fields are marked *

Shopping Cart
Scroll to Top